Caperplus Aqua WIFI 300w Heater

$110.00

The Caperplus Aqua WIFI 300w Heater has an external controller with the temperature control circuit activated by a micro-processor.  The heater can be remotely controlled via WIFI from your Android or Apple phone.

Voltage: 220-240 50/60Hz
Control Range: 15 to 32 “C
Measurement: 0 to 70C
Resolution: +-1 C
Accuracy: +-1 C
Heater Length (mm): 280 x 30
Cable length to controller: 180cm
Power supply to controller: 140cm

1 in stock

Description

Caperplus Aqua WIFI 300w Heater

The Caperplus Aqua WIFI 300w Heater has an external controller with the temperature control circuit activated by a micro-processor.  This makes the heater more reliable than conventional heaters as the control circuit is not subjected to the aquarium water conditions.  The best feature of the heater is the WIFI control function from your Android or Apple phone.  The temperature and be set remotely from anywhere and is monitored 24 hours a day.  The temperature can be recorded on a cloud server and history viewed on a daily, weekly or monthly basis.  There are several protection methods built into the heater.  The control circuit monitors the 2 sensors and will switch off if the difference between the two is over 5 degrees Celsius.  A notification alarm will occur if the temperature is 3 degrees below the set temperature or if the temperature exceeds 3 degrees above the set temperature and will automatically cut off heating.  When the heater leaves the water while it is on, the micro-processor will automatically cut off heating.  This is a fully submersible heater and it is protected by a hard plastic sleeve which provides extra protection for the fish from the hot surface.

Features:

WIFI remote control and monitoring
Dual LCD display for current and set temperature.
Sensitive and reliable control circuit to maintain consistent temperature.
Single setting button for easy adjustments.
Automatic switch off when heater is out of water
2 sensors to provide extra protection
Hard cover protective sleeve with suction cups
Ideal for freshwater and salt water aquariums.

Specification:

Voltage: 220-240 50/60Hz
Control Range: 15 to 32 “C
Measurement: 0 to 70C
Resolution: +-1 C
Accuracy: +-1 C
Heater Length (mm): 280 x 30
Cable length to controller: 180cm
Power supply to controller: 140cm

Additional information

Weight 5 kg