Showing 433–459 of 613 results
The Quick Connect Ball Valve allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect in-line and most commonly used to switch off the supply water so maintenance can be performed and filters need to be changed.
The Quick Connect Ball Valve to Male BSP allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect to a female 1/4 inch BSP fitting on one side and the 1/4 inch quick connect on the other side.  Ball valves are most commonly used to switch off the supply water so maintenance can be performed, such as changing filters.
The Quick Connect Bulkhead Fitting 1/4 inch comes with a plastic nut and are intended for dry applications such as running a tube through a tank stand, cupboard, etc. They do not come with a gasket that would be required for a supply tank install.
The Quick Connect Check Valve is an in-line check valve with 1/4 inch quick connect fittings on both ends. Â Presents water from flowing backwards.
The Quick Connect Elbow allows you to connect the 1/4 inch Polyethylene RO tubing at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/2 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/2 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/4 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/4 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle.
The Quick Connect Elbow Check Valve 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle.   The built in check valve ensures water will flow in one direction from the quick connect to the male BSP side.
The Quick Connect Electric Solenoid Valve 24VDC is used to control water or low viscosity fluids by opening and closing the valve with an electric solenoid.
Size (mm): 60 x 55 x 35
Working pressure: 0-0.8MPa, 0-116 psi
Connection: 1/4 inch Quick Connect
Power: 4.8W.
Flow characteristics: 0.02MPa>0.4L/min; 0.10MPa>1.5L/min; 0.30MPa>3.5L/min; 0.80MPa>6L/min
Operation model: Normally closed (N/C)
Temperature range: 0-80 degrees Celsiu
The Quick Connect Flow Control Valve has convenient 1/4 inch push in fittings with easy release for quick tubing connections. The Nickel plated thumb wheel provides precise manual adjustment of the water flow and a lock nut secures the valve pin in position to prevent accidental turning.
The Pressure Reducing Valve allows for the regulation of water pressure and subsequent flow through the valve.
Size (mm): 65 x 60 x 55
Max input water pressure: 2.5MPa
Output water pressure: 0-0.6MPa
Connection: 1/4 inch Quick Connect
Material: Polypropylene
The Quick Connect Tee fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.
The Quick Connect Tee With Male BSP  fitting splits a single 1/4 inch RO tube into one 1/4 inch RO tube and one 1/4 inch male thread allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.
The Quick Connect to 20mm Female BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 20mm (3/8 inch) male fitting.
The Quick Connect Y fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.
