Heating & Cooling with quality heaters, fans, chillers and temperature controllers are necessary to keep the temperature of your aquarium water at a comfortable level for all your tank inhabitants, all year round.
This 1000w titanium element is designed to be connected to an external controller like theWeipro MX-1014 controller. You may also connect this 1000w Titanium Element to other externalTemperature Controllersbut must be done so by a certified electrician. The element Includes 2 suction cup holders.
This 15w Nano heater is a completely submersible automatic aquarium heater that is electronically regulated and pre-set to 25 degrees C.
Voltage – 220~240V
Frequency – 50/60Hz
Power – 15W
Aquarium Size – Up to 20 litres
Dimension (mm) – 137 x 22 x 17
Cord Length – 150cm
Temperature – Preset 25 degrees C
This 25w crystal glass heater is completely submersible and has a large easy grip adjustable knob. It keeps the water temperature constant is small aquariums between 20 and 35 litres.
Voltage – 220~240V
Frequency – 50/60Hz
Power – 25W
Aquarium Size – Up to 35 litres
Dimension (mm) – 178 x 23
Temp Range (C) – 17 – 35
This 300w stainless steel heater element is used on the external MX-1021 controller as spare or second element. The heating element may also be connected to a temperature controller but should be done so by a certified electrician.
This 500w titanium element is designed to be connected to an external controller like theWeipro MX-1014 controller. You may also connect this 500w Titanium Element to other external Temperature Controllers but must be done so by a certified electrician. The element Includes 2 suction cup holders.
This 50w crystal glass heater is completely submersible and has a large easy grip adjustable knob. It keeps the water temperature constant is small aquariums between 20 and 35 litres.
Voltage – 220~240V
Frequency – 50/60Hz
Power – 50W
Aquarium Size – Up to 60 litres
Dimension (mm) – 178 x 23
Temp Range (C) – 17 – 35
The AQLink ATC300 Plus is an intelligent temperature controller ideal for automating heating and cooling of aquariums, terrariums or reptile enclosures.
Universal Plug accepts NZ plugs
Senor lead is over 130 cm long and is removable for east replacement.
Senor can work in or out of water.
10A Power with fuse for safety
Set is steps of 0.1 Degree C
Slotted mounting holes
5 modes of operation
Two channels allow for heating and cooling
English Manual
The AquaSyncro 100w Glass Heater has a quartz glass tube that is 2mm thick giving it a good shatterproof capacity. The heater is completely sealed and can be fully submersed in a vertical or horizontal orientation.
Voltage: 220V to 240V 50hz
Cable Length: 165 cm
Heater Size (mm): 260 x 23.5
Suitable for 100 to 150 Litre Aquariums
The AquaSyncro 200w Glass Heater has a quartz glass tube that is 2mm thick giving it a good shatterproof capacity. The heater is completely sealed and can be fully submersed in a vertical or horizontal orientation.
Voltage: 220V to 240V 50hz
Cable Length: 165 cm
Heater Size (mm): 360 x 23.5
Suitable for 200 to 250 Litre Aquariums
The AquaSyncro 500w Glass Heater has a quartz glass tube that is 2mm thick giving it a good shatterproof capacity. The heater is completely sealed and can be fully submersed in a vertical or horizontal orientation.
Voltage:220V to 240V 50hz
Cable Length: 165 cm
Heater Size (mm): 450 x 27
Suitable for 300 to 500 Litre Aquariums
The Caperplus Aqua WIFI 300w Heater has an external controller with the temperature control circuit activated by a micro-processor. The heater can be remotely controlled via WIFI from your Android or Apple phone.
Voltage: 220-240 50/60Hz
Control Range: 15 to 32 “C
Measurement: 0 to 70C
Resolution: +-1 C
Accuracy: +-1 C
Heater Length (mm): 280 x 30
Cable length to controller: 180cm
Power supply to controller: 140cm
This 12v DC Cooling Fan is super quiet and includes a clip on bracket that allows the fan to be angled through 90 degrees to blow cool air onto the water surface.