AquaRays stocks a range plumbing parts to meet your saltwater aquarium system needs.  Loc-Line, nozzles, bulkheads, PVC fittings,  uniseals, swing check valves,  ball valves and much more.  Due to the huge range of available Plumbing Parts we do not show everything on our website so please ask if you need something not shown.

Showing 1–16 of 22 results

Aquarium Hose Holder

Aquarium Hose Holder 8mm-16mm

$12.00

The Aquarium Hose Holder is ideal for use with external filters, pumps or water change systems.  Firmly secures the hose into your aquarium and prevents kinks in the hose which slow or stop water flow. The holder secures to nearly all sizes of tanks up to 19mm thick.  Suitable for 8mm to 16mm hoses.

ASI Aquarium Sealant Black

ASI Aquarium Sealant Black

$31.00

ASI Aquarium Sealant Black for the fabrication of aquariums.  strong cohesive bonds to glass without the need of primers. non-toxic to fish.

High Modulus
Excellent tensile strength
Excellent primerless adhesion to glass
Bond unaffected by continuous immersion in water
Excellent clarity
10.2 fl.oz. (310g) cartridge

Dual Loc-Line Flared Nozzle 1 inch

Dual Loc-Line Flared Nozzle 1 inch

$44.00

The Dual Loc-Line Flared Nozzle 1 inch is very flexible and allows you to adjust your flow and circulate the water in multiple directions.

Water movement provides the following benefits:

  • Heat distribution
  • Increase oxygen dissolved in the water
  • Keep debris and particles suspended so they can be removed by mechanical filters
  • Currents offer resistance for fish to swim against
Dual Loc-Line Flared Nozzle 1/2 inch

Dual Loc-Line Flared Nozzle 1/2 inch

$25.00

The Dual Loc-Line Flared Nozzle 1/2 inch is very flexible and allows you to adjust your flow and circulate the water in multiple directions.

Water movement provides the following benefits:

  • Heat distribution
  • Increase oxygen dissolved in the water
  • Keep debris and particles suspended so they can be removed by mechanical filters
  • Currents offer resistance for fish to swim against
Dual Loc-Line Flared Nozzle 3/4 inch

Dual Loc-Line Flared Nozzle 3/4 inch

$43.00

The Dual Loc-Line Flared Nozzle 3/4 inch is very flexible and allows you to adjust your flow and circulate the water in multiple directions.

Water movement provides the following benefits:

  • Heat distribution
  • Increase oxygen dissolved in the water
  • Keep debris and particles suspended so they can be removed by mechanical filters
  • Currents offer resistance for fish to swim against
Flow Accelerator Loc-Line Flared Nozzle 3/4 Inch

Flow Accelerator Loc-Line Flared Nozzle 3/4 Inch

$22.00

The Flow Accelerator Loc-Line Flared Nozzle 3/4 inch consisting of one 3/4 inch threaded male connector attached to 10 cm flexible 3/4 inch loc-line segments and a flared nozzle on the end

Water movement provides the following benefits:

  • Heat distribution
  • Increase oxygen dissolved in the water
  • Keep debris and particles suspended so they can be removed by mechanical filters
  • Currents offer resistance for fish to swim against
Flow Accelerator Swirl Nozzle 1/2 inch

Flow Accelerator Swirl Nozzle 1/2 inch

$24.00

The Flow Accelerator Swirl Nozzle 1/2 inch is installed at your submerged pipe inflow.

Benefits:
Smaller pump requires less capital to purchase and run
Increase in circulation
Rotated to different angles
Increased filtering capability

Flow Accelerator Swirl Nozzle 3/4 inch

Flow Accelerator Swirl Nozzle 3/4 inch

$24.00

The Flow Accelerator Swirl Nozzle 3/4 inch is installed at your submerged pipe inflow.

Benefits:
Smaller pump requires less capital to purchase and run
Increase in circulation
Rotated to different angles
Increased filteringcapability

Fountain Nozzle Blossom

Fountain Nozzle Blossom

$22.00

This quality brass Fountain Nozzle Blossom creates a porous scattering of different water jet heights that give it the look of a flower arrangement.

Length: 70 mm
Diameter: 50 mm
Inlet: 20mm Female thread
Operating Pressure: 40 kpa
Jet Height: 2m
Covering Diameter: 2m

Fountain Nozzle Bubbling

Fountain Nozzle Bubbling

$59.00

This quality stainless steel Fountain Nozzle Bubbling creates an effect like a bubbling spring from which it gets its name Bubbling Fountain nozzle or also known as Universal Spring nozzle.

Length: 145 mm
Diameter: 35 mm
Inlet: 25mm Male thread
Operating Pressure: 50 – 100 kpa
Jet Height: 30 – 50cm
Covering Diameter: 20 – 40cm

Fountain Nozzle Cluster

Fountain Nozzle Cluster

$29.00

This quality brass Fountain Nozzle Cluster also known as a firework nozzle by the way its spray appearance is like fireworks being set off.

Length: 85 mm
Diameter: 75 mm
Inlet: 25mm Female thread
Operating Pressure: 40 kpa
Jet Height: 2m
Covering Diameter: 2m

Fountain Nozzle Mushroom Large

Fountain Nozzle Mushroom Large

$40.00

This quality brass Fountain Nozzle Mushroom Large sprays a water film shaped like a transparent mushroom.

Length: 135 mm
Diameter: 50 mm
Inlet: 25mm Female thread
Operating Pressure: 5 – 8 kpa
Jet Height: 25cm
Covering Diameter: 60cm

Fountain Nozzle Mushroom Small

Fountain Nozzle Mushroom Small

$22.00

This quality brass Fountain Nozzle Mushroom Small sprays a water film shaped like a transparent mushroom.

Length: 105 mm
Diameter: 37 mm
Inlet: 15mm Female thread or 20mm Male thread
Operating Pressure: 5 – 8 kpa
Jet Height: 25cm
Covering Diameter: 45cm

Fountain Nozzle Petunia

Fountain Nozzle Petunia

$19.00

This quality brass Fountain Nozzle Petunia also known as the trumpet nozzle produces an even water film the shape of a petunia flower.

Length: 105 mm
Diameter: 27 mm
Inlet: 15mm Female thread or 20mm Male thread
Operating Pressure: 6 – 8 kpa
Jet Height: 25 cm
Covering Diameter: 50 cm

In-Line Throttle Valve 12/16

In-Line Throttle Valve 12/16

$11.00

This In-Line Throttle Valve 12/16 is ideal for controlling water flow to and from external filters and return pumps.  The ball valve is made from strong durable plastic and is suitable for 12/16mm hoses.  Two lock nuts secure the hoses on both sides to prevent leakage.