Showing all 21 results
Equal Male Straight BSP 1/4 inch Fitting
$3.00The Equal Male Straight BSP 1/4 inch is used to connect multiple RO filter housings together. Made from Nylon
Glycerine Filled Pressure Gauge 1-100psi
$68.95The Glycerine Filled Pressure Gauge is filled with glycerine liquid that coats the internal parts and works to dampen the effect of pulsation and pressure spikes.
- Glycerine Filled Pressure Gauge
- 1/4 inch quick connect Tee
- In-line installation
- 1 – 100 PSI
Inline Ball Valve Push Connect 1/4 inch
$21.95The Quick Connect Ball Valve allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect in-line and most commonly used to switch off the supply water so maintenance can be performed and filters need to be changed.
Quick Connect Auto Shut Off Valve 1/4 inch
$20.60The Quick Connect Auto Shut Off Valve is used with float valves or pressurised tanks to shut off the supply line to an RO system. It utilises the back pressure created by the float valve or pressurised tank to shut off the water supply to the membrane. The Auto Shut Off Valve saves thousands of litres of water per year, without it waste water would continue to run out after the float valve is activated or the tank becomes full.
Quick Connect Ball Valve 1/4 inch
$9.99The Quick Connect Ball Valve allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect in-line and most commonly used to switch off the supply water so maintenance can be performed and filters need to be changed.
Quick Connect Ball Valve to Male 1/4 inch BSP
$9.59The Quick Connect Ball Valve to Male BSP allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect to a female 1/4 inch BSP fitting on one side and the 1/4 inch quick connect on the other side. Ball valves are most commonly used to switch off the supply water so maintenance can be performed, such as changing filters.
Quick Connect Bulkhead Fitting 1/4 inch
$4.85The Quick Connect Bulkhead Fitting 1/4 inch comes with a plastic nut and are intended for dry applications such as running a tube through a tank stand, cupboard, etc. They do not come with a gasket that would be required for a supply tank install.
Quick Connect Check Valve 1/4 inch
$4.98The Quick Connect Check Valve is an in-line check valve with 1/4 inch quick connect fittings on both ends. Presents water from flowing backwards.
Quick Connect Elbow 1/4 inch
$3.29The Quick Connect Elbow allows you to connect the 1/4 inch Polyethylene RO tubing at a 90 degree angle.
Quick Connect Flow Control Valve 1/4 inch
$15.45The Quick Connect Flow Control Valve has convenient 1/4 inch push in fittings with easy release for quick tubing connections. The Nickel plated thumb wheel provides precise manual adjustment of the water flow and a lock nut secures the valve pin in position to prevent accidental turning.
Quick Connect Pressure Reducing Valve 1/4 inch
$26.98The Pressure Reducing Valve allows for the regulation of water pressure and subsequent flow through the valve.
Size (mm): 65 x 60 x 55
Max input water pressure: 2.5MPa
Output water pressure: 0-0.6MPa
Connection: 1/4 inch Quick Connect
Material: Polypropylene
Quick Connect Tee 1/4 inch
$4.69The Quick Connect Tee fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one. The quick connect fitting requires no tool for installation. Polypropylene construction.
Quick Connect Tee with BSP Male 1/4 inch
$4.89The Quick Connect Tee With Male BSP fitting splits a single 1/4 inch RO tube into one 1/4 inch RO tube and one 1/4 inch male thread allowing you to divide the water flow into two or combine two separate water supplies into one. The quick connect fitting requires no tool for installation. Polypropylene construction.
Quick Connect Y 1/4 inch
$4.59The Quick Connect Y fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one. The quick connect fitting requires no tool for installation. Polypropylene construction.
RO High Pressure Switch 1/4 inch
$26.78The most common application of the RO High Pressure Switch is to cut off power to a booster pump when pressure builds up in the RO system triggered by a float valve in a holding tank when it becomes full.
Size (mm): 74 x 64 x 24
Off Pressure: 40 psi
On Pressure: 8-9 psi
Max Pressure: 215 psi
Connection: 1/4 inch Quick Connect
RO Low Pressure Switch 1/4 inch
$26.78The RO Low Pressure Switch is typically used for protecting the booster pump from a low pressure situation such as loss of supply water.
Size (mm): 55 x 45 x 35
Off Pressure: 10-14 psi
On Pressure: 40 psi
Max Pressure: 65 psi
Connection: 1/4 inch Quick Connect