Tunze Turbelle NanoStream Electronic 6055

$399.95

4 in stock

Description

Tunze Turbelle NanoStream Electronic 6055

Turbelle nanostream electronic 6055 are speed-controlled pumps with a Turbelle® controller operating on safety extra-low voltage, to be employed ideally in every aquarium from 40 to 500 liters for simulation of lapping waves or tidal currents. They contain a microprocessor-controlled motor and a Turbelle® controller. The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill. It can be controlled by the Multicontroller / SmartController 7000.

The Turbelle® controller is a device that is used to set the variable pump performance. It can provide a wave simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer. It can be directly connected to a Multicontroller / SmartController 7000. The pump is therefore able to operate together with other pumps, for example, in the high/low tide mode. If the Moonlight 7097.050 (not included in the scope of delivery) is attached to the Turbelle® controller, the night-mode operation will be activated automatically. If this controller is connected to a second controller with the 7092.300 cable, a further pump can be connected and controlled, for example, to provide a wave pounding simulation or an oscillating current. A third controller can be added using the Y adapter cable 7090.300.

This very compact circulation pump for aquariums from 40 to 500 liters can be easily hidden behind a decoration, and thus ensures the harmonious overall appearance of a small aquarium, absolutely perfect for aquascaping. Through the Silence holder it does not touch the aquarium glass pane directly and is therefore unable to transmit vibrations, which makes it one of the quietest pumps available on the market.

Features:

Propellor Technology
Low Motor Heat
3D adjustment
Magnet holder for glass panes up to 15mm
Integrated protective thermostat
Safety extra-low voltage
Controllable speed, wave simulation, tidal currents

Specifications:

For aquariums from 40 to 500 liters.
Flow rate: approx. 1000 to 5,500 l/h with Turbelle® controller
Energy consumption: 4 – 18 W
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m
Dimensions: 70mm Diameter
Outlet: 40 mm
Silence Magnet Holder up to a glass thickness of 15 mm.