Smart Buddie Booster Pump


Out of stock

Category: SKU: RO086


Smart Buddie Booster Pump

Smart Buddie Booster Pump can easily increase the pressure going into your RO or RO/DI system if your starting pressure is low. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate below 50psi, but the reality is you won’t get a lot of water and the product water quality may be compromised if the unit runs below 45 psi. RO units typically run well on municipal water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or slightly higher. This will increase efficiency as well as the rate of production, and can also potentially decrease consumption of DI resin. Get maximum output and the best quality filtered water from your RO system!

The Smart Buddie is designed to work with most RO and RO/DI units rated between 50 and 100 gallons per day. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output. Not only does the Smart Buddie increase pressure, but it has an integrated auto-flush valve and safety pressure switches, simplifying and automating your RO/DI production process.


The high & low pressure safety cutoff switch
Buddie Fit press-fittings
Sealed pressure pump
Fast & Easy installation
Increase water pressure up to 90 PSI
Improved rejection and production rates
Built-in internal automatic flush valve
Built-in check valve


Dimensions: 11.75″L x 5.88″W x 7.88″H
Quick Connect Port Sizes: 1/4″ OD
Power Consumption: 21W @ 24VDC