Quick Connect Check Valve 1/4 inch
$4.98The Quick Connect Check Valve is an in-line check valve with 1/4 inch quick connect fittings on both ends. Â Presents water from flowing backwards.
Showing 271–297 of 372 results
The Quick Connect Check Valve is an in-line check valve with 1/4 inch quick connect fittings on both ends. Â Presents water from flowing backwards.
The Quick Connect Elbow allows you to connect the 1/4 inch Polyethylene RO tubing at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/2 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/2 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/4 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/4 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle.
The Quick Connect Elbow Check Valve 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle.   The built in check valve ensures water will flow in one direction from the quick connect to the male BSP side.
The Quick Connect Electric Solenoid Valve 24VDC is used to control water or low viscosity fluids by opening and closing the valve with an electric solenoid.
Size (mm): 60 x 55 x 35
Working pressure: 0-0.8MPa, 0-116 psi
Connection: 1/4 inch Quick Connect
Power: 4.8W.
Flow characteristics: 0.02MPa>0.4L/min; 0.10MPa>1.5L/min; 0.30MPa>3.5L/min; 0.80MPa>6L/min
Operation model: Normally closed (N/C)
Temperature range: 0-80 degrees Celsiu
The Quick Connect Flow Control Valve has convenient 1/4 inch push in fittings with easy release for quick tubing connections. The Nickel plated thumb wheel provides precise manual adjustment of the water flow and a lock nut secures the valve pin in position to prevent accidental turning.
The Pressure Reducing Valve allows for the regulation of water pressure and subsequent flow through the valve.
Size (mm): 65 x 60 x 55
Max input water pressure: 2.5MPa
Output water pressure: 0-0.6MPa
Connection: 1/4 inch Quick Connect
Material: Polypropylene
The Quick Connect Tee fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.
The Quick Connect Tee With Male BSP  fitting splits a single 1/4 inch RO tube into one 1/4 inch RO tube and one 1/4 inch male thread allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.