The Quick Connect Auto Shut Off Valve is used with float valves or pressurised tanks to shut off the supply line to an RO system. It utilises the back pressure created by the float valve or pressurised tank to shut off the water supply to the membrane. The Auto Shut Off Valve saves thousands of litres of water per year, without it waste water would continue to run out after the float valve is activated or the tank becomes full.
The Quick Connect Ball Valve allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect in-line and most commonly used to switch off the supply water so maintenance can be performed and filters need to be changed.
The Quick Connect Ball Valve to Male BSP allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect to a female 1/4 inch BSP fitting on one side and the 1/4 inch quick connect on the other side. Ball valves are most commonly used to switch off the supply water so maintenance can be performed, such as changing filters.
The Quick Connect Bulkhead Fitting 1/4 inch comes with a plastic nut and are intended for dry applications such as running a tube through a tank stand, cupboard, etc. They do not come with a gasket that would be required for a supply tank install.
The Quick Connect Elbow 1/4 to 1/2 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/2 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/4 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/4 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle.
The Quick Connect Elbow Check Valve 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle. The built in check valve ensures water will flow in one direction from the quick connect to the male BSP side.
The Quick Connect Electric Solenoid Valve 24VDC is used to control water or low viscosity fluids by opening and closing the valve with an electric solenoid.
Size (mm): 60 x 55 x 35
Working pressure: 0-0.8MPa, 0-116 psi
Connection: 1/4 inch Quick Connect
Power: 4.8W.
Flow characteristics: 0.02MPa>0.4L/min; 0.10MPa>1.5L/min; 0.30MPa>3.5L/min; 0.80MPa>6L/min
Operation model: Normally closed (N/C)
Temperature range: 0-80 degrees Celsiu