Showing 28–41 of 41 results
The Quick Connect Elbow Check Valve 1/4 to 1/8 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/8 inch female fitting at a 90 degree angle. The built in check valve ensures water will flow in one direction from the quick connect to the male BSP side.
The Quick Connect Electric Solenoid Valve 24VDC is used to control water or low viscosity fluids by opening and closing the valve with an electric solenoid.
Size (mm): 60 x 55 x 35
Working pressure: 0-0.8MPa, 0-116 psi
Connection: 1/4 inch Quick Connect
Power: 4.8W.
Flow characteristics: 0.02MPa>0.4L/min; 0.10MPa>1.5L/min; 0.30MPa>3.5L/min; 0.80MPa>6L/min
Operation model: Normally closed (N/C)
Temperature range: 0-80 degrees Celsiu
The Quick Connect Flow Control Valve has convenient 1/4 inch push in fittings with easy release for quick tubing connections. The Nickel plated thumb wheel provides precise manual adjustment of the water flow and a lock nut secures the valve pin in position to prevent accidental turning.
The Pressure Reducing Valve allows for the regulation of water pressure and subsequent flow through the valve.
Size (mm): 65 x 60 x 55
Max input water pressure: 2.5MPa
Output water pressure: 0-0.6MPa
Connection: 1/4 inch Quick Connect
Material: Polypropylene
The Quick Connect Tee fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one. The quick connect fitting requires no tool for installation. Polypropylene construction.
The Quick Connect Tee With Male BSP fitting splits a single 1/4 inch RO tube into one 1/4 inch RO tube and one 1/4 inch male thread allowing you to divide the water flow into two or combine two separate water supplies into one. The quick connect fitting requires no tool for installation. Polypropylene construction.
The Quick Connect Y fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one. The quick connect fitting requires no tool for installation. Polypropylene construction.
The most common application of the RO High Pressure Switch is to cut off power to a booster pump when pressure builds up in the RO system triggered by a float valve in a holding tank when it becomes full.
Size (mm): 74 x 64 x 24
Off Pressure: 40 psi
On Pressure: 8-9 psi
Max Pressure: 215 psi
Connection: 1/4 inch Quick Connect
The RO Low Pressure Switch is typically used for protecting the booster pump from a low pressure situation such as loss of supply water.
Size (mm): 55 x 45 x 35
Off Pressure: 10-14 psi
On Pressure: 40 psi
Max Pressure: 65 psi
Connection: 1/4 inch Quick Connect
The Vontron 75 gpd RO Membrane is designed with a thin layer composite to provide high quality water filtration from a wide range of water sources.
The RO Membrane Housing Wrench is designed to make opening and tightening the RO Membrane Housing easy. Suitable for 2.5 inch housing.
The Filter Bracket Three Stage is designed to take three 10 inch filter housings for RO systems and securely month them to a vertical surface. The bracket is made from heavy duty steel in a “Z” shape and has universal pre-drilled holes for mounting.
