Showing 28–54 of 60 results
The Quick Connect Auto Shut Off Valve is used with float valves or pressurised tanks to shut off the supply line to an RO system. It utilises the back pressure created by the float valve or pressurised tank to shut off the water supply to the membrane. The Auto Shut Off Valve saves thousands of litres of water per year, without it waste water would continue to run out after the float valve is activated or the tank becomes full.
The Quick Connect Ball Valve to Male BSP allows you to turn off water flow and isolate parts of your RO system or the entire system. These ball valves connect to a female 1/4 inch BSP fitting on one side and the 1/4 inch quick connect on the other side.  Ball valves are most commonly used to switch off the supply water so maintenance can be performed, such as changing filters.
The Quick Connect Check Valve is an in-line check valve with 1/4 inch quick connect fittings on both ends. Â Presents water from flowing backwards.
The Quick Connect Elbow 1/4 to 1/2 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/2 inch female fitting at a 90 degree angle.
The Quick Connect Elbow 1/4 to 1/4 inch Male BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 1/4 inch female fitting at a 90 degree angle.
The Quick Connect Flow Control Valve has convenient 1/4 inch push in fittings with easy release for quick tubing connections. The Nickel plated thumb wheel provides precise manual adjustment of the water flow and a lock nut secures the valve pin in position to prevent accidental turning.
The Pressure Reducing Valve allows for the regulation of water pressure and subsequent flow through the valve.
Size (mm): 65 x 60 x 55
Max input water pressure: 2.5MPa
Output water pressure: 0-0.6MPa
Connection: 1/4 inch Quick Connect
Material: Polypropylene
The Quick Connect Tee fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.
The Quick Connect to 20mm Female BSP allows you to connect the 1/4 inch Polyethylene RO tubing to a 20mm (3/8 inch) male fitting.
The Quick Connect Y fitting splits a single 1/4 inch RO tube into two 1/4 inch RO tubes allowing you to divide the water flow into two or combine two separate water supplies into one.  The quick connect fitting requires no tool for installation.  Polypropylene construction.
The most common application of the RO High Pressure Switch is to cut off power to a booster pump when pressure builds up in the RO system triggered by a float valve in a holding tank when it becomes full.
Size (mm): 74 x 64 x 24
Off Pressure: 40 psi
On Pressure: 8-9 psi
Max Pressure: 215 psi
Connection: 1/4 inch Quick Connect
The RO Low Pressure Switch is typically used for protecting the booster pump from a low pressure situation such as loss of supply water.
Size (mm): 55 x 45 x 35
Off Pressure: 10-14 psi
On Pressure: 40 psi
Max Pressure: 65 psi
Connection: 1/4 inch Quick Connect
The RO Membrane Housing Wrench is designed to make opening and tightening the RO Membrane Housing easy. Â Suitable for 2.5 inch housing.
