3 in1 Programmable Timer-Light CO2 Oxygen Wave

Description

Programmable Timer – 3 Socket

This Programmable Timer with 3 sockets each individually controllable is a great addition to your aquarium.  Instead of having multiple timers you only need this one precise unit to control your lights, CO2 supply, Oxygen or pumps.  Includes manual on and off bypass for all channels at once.

Features:

Compatible for all common plug types
including NZ
3 Pin plug with fuse safety function.
Provides up to 15 On and Off switches a day.
Options to program individual days or 3 weekly groups (Mon-Fri, Sat & Sun, and Mon-Sun)
Minimum time to the next program setting is 1 minute.
Has an easy to read display.

Specifications:

Voltage 160V to 240V
Max Load 16A 3680W
Min Setting Time 1 min
Battery Backup Rechargeable Ni
Size 160 x 110 x 55mm
Accuracy 0.3 Sec

Operation:

Steps for resetting and programming the timer

1. Reset the timer
   1. Located a reset button through the small hole at the rear of the timer
   2. Use a paper clip to press the reset button
2. Set the clock
   1. Press and hold the CLOCK key
   2. With the CLOCK key pressed use the WEEK, HOUR and MIN keys to set the correct week day, hour and minutes for the clock
3. Programming the timer
   1. Press the PROG key
   2. “1 ON” appears
   3. Press the CH1-3 button to select the required plug
   4. Press the WEEK button for the days the ON time applies to (all days of the week)
   5. Press the HOUR and MIN buttons to select the time the plug socket switches ON
   6. Press the PROG key
   7. “1 OFF” appears
   8. Press the CH1-3 button to select the required plug
   9. Press the WEEK button for the days the OFF time applies to (all days of the week)
   10. Press the HOUR and MIN buttons to select the time the plug socket switches OFF
   11. Repeat to program the other plug sockets